Product Summary
In part one, three different length plastic I-beams are tested under compression to investigate their method of failure. The way in which a member fails (buckling or not) is determined by its Slenderness Ratio, and this ratio is calculated for each beam. Topics covered also include the Radius of Gyration and the Area Moment of Inertia.
In part two, the critical force is predicted using the Euler Column Equation. When a compressive force is applied to a long straight column, it will elastically compress until a critical force is reached, and at this point the column will suddenly buckle. The relationship between this critical load and the column material and geometry is called the Euler Column Equation.
PASCO Advantage: PASCO Capstone software has the ability to embed live video from a webcam and sync the Materials Tester data to the recorded video. Then you can play back the video along with the data on the graph, stepping through one frame at a time to see the exact breaking point
Concepts
- Column Buckling of I-Beams
- Slenderness Ratio
- Euler Column Equation
What's Included
Data Collection Software
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
Interface Required
This product requires a PASCO Interface to connect to your computer or device. We recommend the following option(s). For a breakdown of features, capabilities, and additional options, see our Interface Comparison Guide »
Experiment Library
Perform the following experiments and more with the Column Buckling.
Visit PASCO's Experiment Library to view more activities.
College / Engineering
Three different length plastic I-beams are tested under compression to investigate their method of failure. The way in which a member fails (buckling or not) is determined by its Slenderness Ratio, and this ratio is calculated...
College / Engineering
The Euler Column Equation predicts the maximum compressional force applied to a column before it buckles. This value depends on the length of the column, its Area Moment of Inertia, and Young's Modulus for the material.
