Product Summary
This Limit Switch is used to limit the motion of Motorized Structures. The Limit Switch is plugged into a digital input on the //control.Node Voltage Sensor (PS-3349) which is plugged into the Sensor Port on the //control.Node (PS-3232). When the Limit Switch is activated by pressing up against an object, the Voltage Sensor detects a change in state.
The Limit Switch state can be read and programmed in Blockly coding in Capstone or SPARKvue to cause motion to stop or start.
Applications
- The Limit Switch can be mounted directly to the Turntable (ME-7024) on the Motorized Crane (ME-7030) so the switch is activated when the bump on the Turntable passes by.
- The Limit Switch can be mounted on any PASCO Structures I-beam using the Limit Switch Holder (PS-3343).
What's Included
- 1x Limit Switch wired to a female 3-pin header
- 2x Screws to connect the Limit Switch to a Limit Switch Holder or Turntable
Data Collection Software
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
